Prostar PSW10K-PRO single phase off grid solar 10000 watt inverter with 100a mppt solar charge controller is perfect for off-grid, backup power supply and self-consumption applications for homes and small businesses, it is a pure sine wave, hybrid solar inverter system with 50Hz/60Hz frequency, providing power for every need.
Prostar single phase off grid solar 10000 watt inverter constantly holds the voltage and frequency of the AC grid within the permissible limits, it is establishing a stable stand-alone power grid. Both loads and power sources are connected directly to this grid.
If there is an energy surplus, 96v off grid solar power energy 10000 watt inverter generator charges the batteries. If there is a shortage, it supplies the grid with energy from the batteries. Thanks to its highly developed battery management system, it can recognize the state-of-charge at any given moment and, as system manager, it can also make ongoing decisions.
If there is a great demand for electricity, off grid solar power energy 10000 watt inverter can start a diesel generator or it can disconnect loads as needed. If the batteries are fully charged and there is little demand, it can reduce the PV plant’s electricity production. It also determines the optimal strategy for charging the batteries, increasing their life span.
Inverter Features & Benefits
1. Pure sine wave solar inverter
2. Configures quickly into compact wall mounted system
3. Built-in 100A MPPT solar charge controller
4. Built-in isolated transformer
5. Harness the continuously declining production cost of solar power
6. Configurable battery charging current based on applications via LCD setting
7. Intelligent functionality enables self consumption with solar prioritization, peak shaving and, assisting small generators with heavy loads
8. Uninterruptible power supply in case of grid black-out
9. Robust design through rigorous reliability testing
10. Auto access MPP tracking states, be most probable to use PV energy in priority
11. Overload, over-temperature and short-circuit protection
12. Smart multi-stage battery charger with optional equalization for optimized battery performance
13. Cold start function (starting with only battery power and no AC source or PV modules attached)
14. Intelligent AC and PV complementary power supply function to extend the battery life
15. Staggering energy storage and power generation
Specification
| Model | PSW10K-Pro |
| Rated Power | 10000W |
| Installation Type | Wall Mounting |
| INPUT | |
| Voltage Range | 100V/110V/120V/127AC or 208V/220V/230V/240VAC(+25%,-36%) |
| Frequency Range | 50/60 Hz±2.5Hz (Auto sensing) |
| OUTPUT | |
| AC Voltage Regulation | 100V/110V/120V/127AC±0.5% or 208V/220V/230V/240VAC±0.5%（AC Mode±10%） |
| Frequency | 50HZ/60HZ±0.5HZ Auto（AC Mode±2.5HZ） |
| Surge Power | 30KW |
| Battery Efficiency | 85% |
| AC Efficiency | 93% |
| Transfer Time | 8ms default, 4ms optional |
| Waveform | Pure Sinewave |
| BATTERY | |
| Battery Voltage | 96VDC |
| Floating Charge Voltage | 108.8VDC |
| Overcharge Protection | 120.0VDC |
| SOLAR CHARGER & AC CHARGER | |
| Max. PV Array Power | 12000W |
| MPPT Range @ Operating Voltage | 130VDC~ 175VDC |
| Max. PV Array Open Circuit Voltage | 180VDC |
| Max. Solar Charge Current | 100A |
| AC Charge Current | 0A-40A Adjustable |
| Maximum Charge Current | 140A |
| Maximum Efficiency | 98% |
| PROTECTION | |
| Battery Reversal | Optional |
| Output Short Circuit | AC mode:Jump fuse, Inverter mode: Shut down |
| Overload | Full load 105%, Inverter alarm. Overload 130%, Inverter shut down output in 10s. Once the load back to normal, Inverter recover output. Once the inverter is off, it must be turned on manually. |
| High AC Voltage | Turn off AC,turn to Inverter mode automatically |
| Low DC Voltage | Inverter shut down automatically,Once the AC recover, Inverter turn on and charge automatically |
| Over Temperature | Inverter will alarm and turn off but it will recover to normal status after cooling down |
| Isolation Type | Built-in Isolated Transformer |
| Protection Grade | IP20 |
| ENVIRONMENT | |
| Humidity | 15～93%（No condensation） |
| Temperature | -10℃ ~ 50℃ |
| Altitude | ≤3000m |
| INTERFACE | |
| Communication | USB, RS232/RS485/SNMP (Optional) |
| Display | LCD + LED |
| MECHANICAL SPECIFICATIONS | |
| Dimension, DxWxH (mm) | 700x406x225 |
| Net Weight (Kgs/PC) | 61.0 |
| Product specifications are subject to change without further notice. | |
System Structure
Inverter Working Mode Choice
Which inverter voltage and loads are there in stand-alone systems?
Off-grid solar systems are direct current systems without a network connection. Prostar PSW10K-PRO single phase off grid solar 10000 watt inverter provides a secure power supply for off-grid systems. It forms a standard AC voltage grid into which all electricity consumers and generators can be flawlessly integrated.
10000 Watt Inverter Generator Details
0 Comments